CLEANING, REFRESHING OF AIR CONDITIONING
- It effectively removes all pollutants that can affect the quality of the air itself.
- Permanently eliminates the unpleasant smell of fungi and unpleasant smell of moisture.
- Compatible with materials – the solution prepared from the concentrate at a working concentration of 5% (1:19) with water is compatible with most metals, painted surfaces, rubbers, plastics, fabrics.
- After evaporation, it leaves a dry and clean surface, resistant to attracting dust.
AIR CONDITIONING DE-FUMIGATION AND DISINFECTION
- The only formulation with FULL BIOBIAL SPECTRE (Viruses, Bacteria, Fungi, Mycobacteria, Spores up to 15 minutes).
- Removes Legionella pneumophila in 1 minute.
- Effectiveness confirmed by tests according to European standards: EN1040, EN13727, EN1276, EN13697, EN13623, EN1275, EN1650, EN14476, EN13704, EN14348.
- Biocidal Product Marketing Permit No. 7420/18.
- PZH approval no. B.BK.60112.0333.2023.
- This is a new standard of safety against airborne infections and contamination.
SAVINGS
- The most economical disinfection.
- Concentrate used with water at a concentration of 5% (1:19).
- 1L of Concentrate is 20L of ready-to-use solution.
CUSTOMER SATISFACTION
- Pleasant, refreshing fragrance.
- Storage and use without risk of fire – non-flammable water-based product.
- Does not contain, acids, phenols (dangerous for pregnant women, animals) and organic solvents.
- Complete customer satisfaction – no complaints.
Application
Cleaning, refreshing, de-fumigation and disinfection of air conditioning and ventilation:
- air conditioner evaporators
- air handling units
- air coolers
- heat exchangers
- ventilation ducts
- fan-coili
- recuperators
- air distribution channels in heat pumps
- cleaning of home air conditioners
- and other air conditioning and refrigeration equipment in the HVAC industry
- any surfaces in the installer’s workplace, including in the food and medical industry (the preparation has permits for contact with food-contact surfaces)
USE.
PREPARE A WORKING SOLUTION OF 5% CONCENTRATION: Prepare a 5% ready-to-use working solution from NANOCLEAN® AIR Concentrate and water. e.g.: 50ml of concentrate + 950ml of water = 1L of Ready to Use (GDU) solution.
Mix the solution in the proportions according to the table below:
Concentration of the preparation [%] |
Dilution ratio |
Amount of water: |
475ml |
950ml |
4,75L |
9,5L |
19L |
23,75L |
95L |
5 % |
1 : 20 |
Amount of concentrate: |
25 ml |
50 ml |
250 ml |
500 ml |
1L |
1,25L |
5L |
Use for disinfection of air conditioning and indoor ventilation:
- turn off the air conditioner and open the indoor unit.
- remove the filter, vacuum, rinse under running water (bath, shower).
- pour NANOCLEAN AIR ready-to-use liquid into an applicator e.g.: hand sprayer, hydronette
- spray the washed filter with NANOCLEAN AIR Ready to use and leave for 15 minutes, rinse with water and dry.
- Spray the evaporator inside the air conditioner thoroughly with NANOCLEAN AIR Ready to use.
Wait 15 minutes.
The preparation through the laths will flow into the condensate tray, from where it will be drained into the drain.
6 Install the filter in the air conditioner, close the indoor unit and turn on the air conditioner to complete the process.
Surface disinfection:
Apply the ready-to-use product to the surface with a foaming tip or wipe with a clean wipe that does not leave fibers, maintaining contact time up to 15 minutes to ensure efficacy, bactericidal, fungicidal, yeasticidal, virucidal, sporicidal and mycobactericidal.
After using the product, surfaces in contact with food should be rinsed with drinking water.
PACKAGE
Container with measuring cup 1L x 10 pcs (per box)
Half-pallet: 160 pcs (16 boxes)
Pallet: 320 pcs (32 boxes)