A NEW STANDARD OF SAFETY IN HVAC SYSTEMS

ALL IN ONE

CLEANING, REFRESHING, ANTI-FUNGAL TREATMENT, DISINFECTING, NICE SMELL THAT LASTS LONGER

100% FRESHNESS.
Removes unpleasant odours and leaves a nice smell that lasts longer.

100% RELIABILITY AND EFFECTIVENESS.
Confirmed by tests according to EU standards: EN1040, EN13727, EN1276, EN13697, EN13623, EN1275, EN1650, EN14476, EN13704, EN14348

100% SATISFIED CLIENTS.
Thanks to effective cleaning and disinfection.

100% SAFETY.
FULL BIOCIDAL SPECTRUM:
viruses, fungi, bacteria, spores, mycobacteria. Kills legionella pneumophila in 1 minute.

100% CLEANING EFFICIENCY.
Thanks to multi-ingredient active basis.

100% COMFORT AND SAFETY FOR USERS.
Thanks to innovative safety formula.

FULL BIOCIDAL SPECTRUM

The only spray-on product on the market for cleaning, refreshing, fuming and disinfecting air-conditioning evaporators and other HVAC ventilation and refrigeration equipment in buildings with a FULL BIOCIDAL SPECTRUM: Viruses, Bacteria, Fungi, Mycobacteria, Spores in up to 15 minutes.

It effectively removes all pollutants that can affect the quality of the air itself. Leaves a refreshing scent.
Can be used in ultrasonic equipment.

Use biocides safely. Always read the label and product information before use.

DESCRIPTION

AIR-CONDITIONING CLEANING & REFRESHMENT

AIR-CONDITIONING FUMIGATION AND DISINFECTION

SAVING TIME

CUSTOMER SATISFACTION

PROFESSIONAL SPRAY

APPLICATION

Cleaning, refreshing, fumigation and disinfection of air conditioning and ventilation:

HOW TO USE

APPLICATION FOR DISINFECTING INDOOR AIR CONDITIONING:

1

Turn off the air conditioner and open the indoor unit.

2

Dismantle the filter, vacuum it, rinse it under running water (bathtub, shower).

3

Spray the washed filter with NANOCLEAN® AIR. Ready to use, leave for 15 minutes, rinse with water and dry.

4

Spray the evaporator inside the air conditioner thoroughly with NANOCLEAN® AIR. Ready to use. Wait 15 minutes. The preparation will flow through the lamellas to the condensate tray, from where it will be discharged to the drain.

5

Install the filter on the air conditioner, close the indoor unit and turn on the air conditioner to complete the process.

AIR CONDITIONING DISINFECTION IN VEHICLES (FOR PROFESSIONALS):

1

Turn off the air conditioning.

2

Remove the pollen filter in the pit or inside the cockpit under the cockpit.

3

We recommend that you blow out all the grilles and ventilation ducts in the cockpit with compressed air.

4

Make sure there is direct access to the evaporator in the car. Sometimes it is necessary to disassemble the fan.

5

Pour the NANOCLEAN® AIR liquid. Ready to use, to the dispenser with a lance ended with a nozzle (suggested amount of liquid for disinfecting the car’s evaporator: 0.5-1L).

6

Note: The use of the AC-99INOX lance with the pressure method allows for thorough cleaning of inaccessible places of the evaporator and the drainage channel, and thus improves the effectiveness and durability of disinfection of the entire HVAC system (in the case of no access to the evaporator for the AC-99INOX lance, use the AC-99NYLON lance).

7

Insert the AC-99INOX lance into the evaporator channel and dispense the preparation directly towards the evaporator by moving the lance for 10-30 seconds (depending on the dirt level of the evaporator and the HVAC system) until the liquid in the dispenser container (0.5-1L) is exhausted.

8

Remove the dosing lance and wait 15 minutes for the biocidal effect of the preparation and its outflow through the air conditioning drain channel under the car.

9

Install a new pollen filter.

10

Turn on the air supply on the so-called open circuit and fan speed at maximum power.

11

Set the lowest temperature, with the air conditioning off, for 5 minutes to complete the process (the fresh smell from the airflow should spread throughout the car).

Note: We recommend disinfecting the air conditioning at least twice a year or every 20,000 km.

APPLICATION FOR SURFACE DISINFECTION:

1

Apply the ready-to-use liquid on the surface or on a cloth that does not leave fibers and wipe it.

2

Maintain a contact time of up to 15 minutes for bactericidal, fungicidal, yeasticidal, virucidal, sporicidal and mycobactericidal efficacy.

3

After using the liquid, contact surfaces with food should be rinsed with drinking water.

SAFETY

Before use, please read the product label, its TDS and SDS.

TESTS

GROUP: STANDARD: ORGANISM: DISINFECTION TIME:
Bacteria EN 13697 Pseudomonas aeruginosa ATCC 15442 5 minutes
Staphylococcus aureus ATCC 6538 5 minutes
Escherichia coli ATCC 10536 5 minutes
Enterococcus hirae ATCC 10541 5 minutes
Bacteria EN 13623 Legionella pneumophila ATCC 33152 60 minutes
Bacteria EN 1040 Legionella pneumophila ATCC 33152 1 minute
Bacteria EN 1276 Legionella pneumophila ATCC 33152 1 minute
Escherichia coli ATCC 10536 1 minute
Pseudomonas aeruginosa ATCC 15442 1 minute
Staphylococcus aureus ATCC 6538 1 minute
Enterococcus hirae ATCC 10541 1 minute
Bacteria EN 13727 Pseudomonas aeruginosa ATCC 15442 1 minute
Staphylococcus aureus ATCC 6538 1 minute
Enterococcus hirae ATCC 10541 1 minute
FUNGI EN 13697 Candida albicans ATCC 10231 15 minutes
Aspergillus brasiliensis ATCC 16404 (Aspergillus Niger) 15 minutes
FUNGI EN 1275 Candida albicans ATCC 10231 1 minute
FUNGI EN 1650 Candida albicans ATCC 10231 5 minutes
SPORES EN 13704 Bacillus subtilis ATCC6633 5 minutes
MYCOBACTERIA EN 14348 Mycobactrium terrae  DSM 43227 5 minutes
Mycobacterium avium   DSM 44157 5 minutes
VIRUSES EN 14476 Adenovirus ATCC VR-5 5 minutes
VIRUSES EN 14476 Murine  Norovirus  S99 5 minutes
VIRUSES EN 14476 Poliovirus  LSC -2ab 5 minutes
VIRUSES EN 14476 Vaccinavirus  ATCC-VR 1508 5 minutes

PACKAGE

Ready-to-use spray 500 ml,  12 pcs box

Product Code:

Ready-to-use in 1 liter bottle,  10 pcs box

Product Code:

Ready-to-use in 5L canister,  4 pcs box

Product Code:

DISCOVER OUR OTHER PRODUCTS